Regardless of whether your motorcycle is two-wheeled or three-wheeled, if you find that the control of the throttle cable is very inflexible, and the throttle cannot be lowered quickly after being released, or it is not easy to add the throttle, it is obvious that the motorcycle The throttle cable has rusted and failed and should be considered for replacement.

Under normal circumstances, the throttle cable of a motorcycle should be very sensitive, but it will not be so sensitive after riding the motorcycle for three or four years or six or seven years. This kind of situation is easy to appear on three-wheeled motorcycles, because some parts of the throttle cable of the three-wheeled motorcycle are exposed outside. Due to long-term exposure to the sun and rain, the outer part of the throttle cable is easy to rust and deform, resulting in the inside of the throttle. The cable is easy to get stuck and cannot be pulled or is not easy to pull, so that when we are riding, the accelerator cannot be well controlled.

When there is a problem with the throttle cable of the motorcycle, the most obvious manifestation is that the throttle cannot be lowered quickly when the throttle is applied, and the idle speed of the motorcycle is very high. When we are turning or stopping, the throttle control handle of the motorcycle has been fully released, but the throttle is always very large (about 4,000 rpm), and the idle speed of the motorcycle is quite high.

This situation is very dangerous. The throttle cable of the motorcycle fails, and the idle speed of the motorcycle remains high. When turning, if the brakes are not sensitive, accidents will easily occur. Once, when I was on an uphill and turning bridge, due to the high idle speed of the motorcycle, the forward momentum was very high, and it was too late to turn, so I almost rushed off the bridge. It can be seen that the damage caused by the failure of the throttle cable of the motorcycle very big.